Kärcher equipment user guides

Remove loose dirt with a dry vacuum before wet cleaning – the SE 3 Compact is not a dry vacuum cleaner. Test the surface for colour fastness and water resistance in an inconspicuous area. Fill the fresh-water tank only to the MAX mark (up to 1.7 L). Water or cleaning solution must not exceed 50 °C. Use Kärcher RM 519 or only the supplied detergent that is explicitly suitable for spray-extraction cleaners, following its package dosage exactly. Do not use foaming products or a chemical with unknown dosage. Spray moderately and pull the nozzle slowly towards you in overlapping strokes; do not over-wet the surface. After use, flush the system with clean water, empty and rinse the dirty-water tank (up to 2.9 L), and leave the parts open to dry. Return the machine clean, emptied and with all accessories at the agreed time.

Use a suitable spray-extraction detergent at the package dosage. The SE 3 Compact fresh-water tank holds up to 1.7 L; solution must not exceed 50 °C.

Return the equipment at the agreed time, clean, with empty tanks and all issued accessories. Stop using damaged or malfunctioning equipment and contact us.

Use the device only for household cleaning permitted by the manufacturer and on suitable glass. The minimum window size is 40 × 40 cm. Pre-clean heavily soiled windows; never place the robot on wet glass. For exterior glass at height, attach the supplied 4 m safety rope to a suitable stable point as directed by the manual before installing the robot. Keep the rope clear of its travel path. Never lean or climb out of a window. Before starting, keep the area below clear of people and pets, and keep the device within sight and hearing while it operates. Stop outdoor use in strong wind or precipitation, or if a fault or warning occurs. Do not use the robot on damaged glass, frames or anchor points, or where safe installation and tethering cannot be ensured. Use a professional cleaning service in that case. Use only original Kärcher window detergent. Mix a 20 ml RM 503 portion with 230 ml water (250 ml total); always follow the issued package and manufacturer instructions. Return the robot, three microfibre cloths, remote, filling bottle, safety rope at the agreed time. Detergent is not included in the rental set.

Minimum window size: 40 × 40 cm. Secure the safety rope before starting. 20 ml RM 503 + 230 ml water = 250 ml solution; also follow the package instructions.

Return the equipment at the agreed time, clean, with empty tanks and all issued accessories. Stop using damaged or malfunctioning equipment and contact us.

One shared 20 ml Kärcher RM 503 portion is included for both devices. Additional portions cost extra. Mix one 20 ml RM 503 portion with 230 ml water (250 ml total). Follow the package dosage and each device manual. Never pour solution into the WV 6 dirty-water tank. WV 6 Plus: Use the WV 6 window vac on moist, smooth surfaces such as windows, mirrors and tiles. Do not vacuum dust or large quantities of liquid. WV 6 Plus: Spray a suitable window-cleaning solution onto the surface and wipe with the microfibre cloth. Follow the detergent package dosage; do not use foaming or alcohol-containing cleaners. WV 6 Plus: Switch on the device and remove water from the surface with the suction nozzle. WV 6 Plus: Empty the 150 ml dirty-water tank no later than the MAX mark. WV 6 Plus: Switch off and disconnect the charger before cleaning. Rinse the removed tank, clean the nozzle and let parts dry. Do not immerse the device or clean it under running water. WV 6 Plus: Charge only with the supplied compatible Kärcher charger indoors in a dry place. Return the device clean, with the tank empty and all issued accessories. RCW 4: Use the device only for household cleaning permitted by the manufacturer and on suitable glass. The minimum window size is 40 × 40 cm. Pre-clean heavily soiled windows; never place the robot on wet glass. RCW 4: For exterior glass at height, attach the supplied 4 m safety rope to a suitable stable point as directed by the manual before installing the robot. Keep the rope clear of its travel path. Never lean or climb out of a window. RCW 4: Before starting, keep the area below clear of people and pets, and keep the device within sight and hearing while it operates. Stop outdoor use in strong wind or precipitation, or if a fault or warning occurs. RCW 4: Do not use the robot on damaged glass, frames or anchor points, or where safe installation and tethering cannot be ensured. Use a professional cleaning service in that case. RCW 4: Use only original Kärcher window detergent. Mix a 20 ml RM 503 portion with 230 ml water (250 ml total); always follow the issued package and manufacturer instructions. RCW 4: Return the robot, three microfibre cloths, remote, filling bottle, safety rope at the agreed time.

Mix one 20 ml RM 503 portion with 230 ml water (250 ml total). Follow the package dosage and each device manual. Never pour solution into the WV 6 dirty-water tank.

Return the equipment at the agreed time, clean, with empty tanks and all issued accessories. Stop using damaged or malfunctioning equipment and contact us.

Use the WV 6 window vac on moist, smooth surfaces such as windows, mirrors and tiles. Do not vacuum dust or large quantities of liquid. Spray a suitable window-cleaning solution onto the surface and wipe with the microfibre cloth. Follow the detergent package dosage; do not use foaming or alcohol-containing cleaners. Switch on the device and remove water from the surface with the suction nozzle. Empty the 150 ml dirty-water tank no later than the MAX mark. Switch off and disconnect the charger before cleaning. Rinse the removed tank, clean the nozzle and let parts dry. Do not immerse the device or clean it under running water. Charge only with the supplied compatible Kärcher charger indoors in a dry place. Return the device clean, with the tank empty and all issued accessories.

Use a suitable window-cleaning detergent at the package dosage in the spray bottle. Do not pour cleaning solution into the WV 6 dirty-water tank.

Return the equipment at the agreed time, clean, with empty tanks and all issued accessories. Stop using damaged or malfunctioning equipment and contact us.

Read the manufacturer manual first. Test surfaces for heat and moisture resistance and fabrics in a hidden area. Check that the descaling cartridge is fitted. Fill the removable tank to the MAX mark with tap water; a mix containing no more than 50% distilled water is also permitted. Do not add detergent, vinegar or fragrance. Attach the suitable nozzle. Switch on and wait about 30 seconds for the device to be ready. Clean only suitable washable surfaces. Follow the garment care label and manufacturer guidance when steaming clothes; the device does not extract dirty water. Never direct hot steam at people, animals or electrical equipment. Switch off and let the device cool before removing accessories. Empty the tank, clean issued cloths according to the manual, and return all accessories at the agreed time.

Fill the 200 ml tank only with suitable water. No detergents or additives.

Return the equipment at the agreed time, clean, with empty tanks and all issued accessories. Stop using damaged or malfunctioning equipment and contact us.